ADT-Link PCIe 4.0 x16 Riser Cable RTX3090 RX6800xt Graphics Cards ITX A4 PC Case PCI-E4.0 16x Double Reverse Extension Cable

Brand name: ADT-LINK

Product name:PCIe4.0 x16 to x16 extension cable

Product model:R33UF-TU-BK-4.0( Black color ) R33UF-TU-SI-4.0 ( Silver color)

Transfer speed: PCIe 4.0 x16full speed, 256G/bps (Max)

Wire length:170 ~ 300 mm, the length can be customized.If you need other lengths, please contact us to change the price, thank you!

Application: PCIe x16 graphics video card to PCIe x16 slot extension cable for ITX mainboard housing

Suitable graphics card:RTX3090 RX6800xt, Supports all PCIe4.0 graphics cards

Compatible chassis: A4 ITX customized chassis, please contact the chassis seller, and purchase according to the model and cable length specified by the chassis seller.

Usage restrictions: PCIe4.0 has high requirements on the equipment. As long as the extension cable is connected, the signal will be attenuated. This product does not guarantee PCIE4.0 full speed. If the equipment is aging, the signal is poor or the environment is not good, please use it at a lower speed.

Usage restrictions: Only for ITX motherboards and their adapted mini-cases to install and use. Old graphics cards or motherboards older than four years are not supported.

Description of wire length and hole distance:

The PCB board of the 4.0 double-reverse version is relatively large. If you upgrade from 3.0 to 4.0, the cable length should be added about 0.2~0.5cm. For example, the original version of 3.0 has a cable length of 18.5cm, and the upgrade to 4.0 requires a cable length of 19cm.

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector's Length. 

Product advantages:

1. Wire advantage, the fourth-generation anti-interference low-resistance wire developed and designed by ADT is scratch-resistant and wear-resistant, high-frequency. Support PCIe 4.0 stable transmission.

2. Cord length advantage, from 15cm to 60cm can be customized.

3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.

4. The product is made of high-quality materials and the PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold fingers have sufficient gold plating content and the gold plating feet have good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance.

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.