| Product Name | BETAFPV Nano HD Camera with 200RC FPV Wearable Watch 2 LCD 5.8G 48Ch FPV Monitor Wireless Receiver Watch LCD Display for Mini Racing Drone |
| Item NO. | F37148-A |
| Weight | 0.19 kg = 0.4189 lb = 6.7021 oz |
| Category | DIY RC Drone Accessories > VTX |
| Brand | BETAFPV |
| Creation Time | 2020-04-20 |
BETAFPV Nano HD Camera for Mini Racing Drone Crossing Machine Beta65X HD / Beta75X HD / Beta85X HD / Beta95X / HX115 HD Drone
BETAFPV Nano HD Camera is the Lightest HD camera at the current market! Special customized for Beta65X HD, ultra definition with 1080p resolution, super-light weight with 6.71g, complete functions with OSD, audio and record. Also, it adopts a 1/2.7" CMOS sensor and a 1.8mm lens for excellent latency. Best choice for all whoop drones like Beta65X HD, Beta75X HD, Beta85X HD and HX115 HD. Discover the beauty of the world and record the wonderful life! We also provide you a canopy for these Nano HD camera.
Check how clear the image is!!! With the high definition of 1080p resolution, you will have a fairly clear image. The image quality is super awesome even in a gloomy light environment.
As usual, we use the 5V, GND and CAM pads for most of the function. For option, if you want to change the configuration of the camera, there are some modification needed. Remove the 6-pins black connector and use the ADC pad.
What is the function of the ADC pad? You could control the FPV camera via your radio transmitter, like change the configuration of the camera OSD menu, start/stop the recording etc.
Note: Know more about FPV Camera Control (Joystick Emulation).
You need to configure your FC before you could use this function. Use the connection diagram with BETAFPV 1-2S FC (SPI Frsky Version) for example. First check the connection diagram below, the ADC pad is connected with the LED pad on the FC board. So you need enter the CLI commands via the Betaflight Configuration.
resource LED_STRIP 1 NONE
resource CAMERA_CONTROL 1 A00
set camera_control_mode = HARDWARE_PWM
set camera_control_ref_voltage = 330
set camera_control_key_delay = 200
set camera_control_internal_resistance = 99
set camera_control_button_resistance = 125,110,90,75,20
set camera_control_inverted = OFF
Note: If you use other pad on the FC board for this function, you should change the port in the CLI.
If the configuration works correctly, you could enter the Nano HD camera OSD with the Joystick gesture below.
Here is the diagram for connecting F4 1-2S AIO Brushless Flight Controller (No RX)
Here is the diagram for connecting F4 1-2S AIO Brushless Flight Controller.
QWinOut 200RC FPV Wearable Watch 2" LCD 5.8G 48Ch FPV Monitor Wireless Receiver Watch LCD Display for FPV RC Drone Quadcopter
Description:
Brand: QWinOut
Model: 200RC
Item name: FPV Wearable Watch
Screen: 2" TFT LCD display.
Resolution: 480*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found