FEICHAO F115 FPV Racing Indoor DIY Drone Kit F411 20A AIO 2S-5S BLHELI_ S Flight Controller 1204 5000kv Motor FLYSKY/ T-LITE Remote Controller Item NO.: F41821-A F41821-B F41821-C F41821-D E F G H I

FEICHAO F115 FPV Racing Indoor DIY Drone Kit F411 20A AIO 2S-5S BLHELI_ S Flight Controller 1204 5000kv Motor FLYSKY/ T-LITE Remote Controller

NOTE: Pls choose the version you need according to the corresponding picture.

Functions and Features

Built-in OSD Betaflight
Support BLHeliSuit configuration
Support voltage 2-3S
Battery life is about 5 minutes
The remote control distance is about 300 meters"

Propeller 

Name: 2540 2.5x4 inch three-blade propeller
Material: PC
Center mounting hole: 1.5mm
Wheel thickness: 5mm
Blade width: 9.9mm
Quantity: 4 pairs
Weight: 0.98g

ESC and flight control integrated 

Flight control parameters:
CPU: STM32F411CEU6
IMU: MPU6000
OSD: AT7456E
Barometer: BMP280
Sensor: Built-in current sensor
Firmware version: betaflight_4.1.1_MATEKF411
Receiver: Frsky / Futaba / Flysky / TBS Crossfire / DSM-X: DSM-2 receiver

ESC parameters:
Firmware support: BLHELI_ S
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-5S Lipo
Continuous current: 20A
Peak current: 25A
Firmware version: BLHELI _S (G-H-30)
Product net weight: 7g

Image Transmission

Name: 5.8G 40CH 25mW 100mW 200mW switchable FPV transmitter
Input voltage: 4.5-5.2V (DC)
Input current: 500mA @ 200mW
Power: 25mW / 100mW / 200mW (switchable)
Channel: 40CH
Antenna connector: IPEX
Size: 37x24x5mm
Mounting hole: 25x25mm
Weight: 2g

Motor

Specifications: 1204
KV: 5000
Configuration: 9N12P
Motor shaft: Φ1.5mm
Motor size: Φ15mm* 16.2mm
Weight (g): 5.9g
Support 2-4s

Camera 

Horizontal resolution: 1200TVL
Signal system: PAL / NTSC
Net weight: 2 grams
Voltage: 3.7-18V
Installation size: 14mm

Receiver version: FRSKY version, FLYSKY version, without receiving version(Optional)

Note: 

1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become invalid). The battery cannot be powered off immediately after it is fully charged. Charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the airplane, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. The product is unassembled/welded in loose parts. If you have any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to answer related questions. If customers need to assemble, please feel free to contact us, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
5. This product is not a toy and is not suitable for children under 14 years of age.
6. If you are a beginner, it is recommended to be assisted by an experienced adult
7. Novices should pay attention not to take the airplane by hand or let children take it to prevent scratches
8. Please turn off the start switch in time when the airplane falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor, etc. Check whether the airplane is damaged or the screws are loose.