Home>DIY RC Drone Accessories>GEPRC CinePro 1080P 4K HD FPV Racing Drone Quadcopter F722/F405 Flight Controller 115mm PNP BNF 5.8g 48CH 500mW VTX

GEPRC CinePro 1080P 4K HD FPV Racing Drone Quadcopter F722/F405 Flight Controller 115mm PNP BNF 5.8g 48CH 500mW VTX Item NO.: F29849/ F29850/1/2/3/4/5/6/7/8/9/F29860/F29861

Name: GEPRC CinePro 1080P 4K HD FPV Racing Drone Quadcopter F722/F405 Flight Controller 115mm PNP BNF 5.8g 48CH 500mW VTX
Brand: GEPRC
SKU: F29849/ F29850/1/2/3/4/5/6/7/8/9/F29860/F29861
Price: 211.65 USD
Availability: SoldOut

Write a Review

US$ 211.65

US$ 249.00 Save US$ 37.35 (15% Off)

Sold Out

Product Name	GEPRC CinePro 1080P 4K HD FPV Racing Drone Quadcopter F722/F405 Flight Controller 115mm PNP BNF 5.8g 48CH 500mW VTX
Item NO.	F29849/ F29850/1/2/3/4/5/6/7/8/9/F29860/F29861
Weight	0.56 kg = 1.2346 lb = 19.7534 oz
Category	DIY RC Drone Accessories
Brand	GEPRC
Creation Time	2019-07-16

GEPRC CinePro 1080P 4K HD FPV Racing Drone Quadcopter F722/F405 Flight Controller 115mm PNP BNF 5.8g 48CH 500mW VTX

STABLE PRO F722 DUAL Gyro ICM20689 Version:

Flight Controller：

Model:STABLE PRO F7 35A
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Firmware target: EXF722DUAL
Integrated LC Filter
Size: 26x26mm board, 20mm mounting holes (M2)

ESC BLheli_32 2-6S 4in1：

MCU:STM32F051
Constant:35Amps
Burst:45Amps
Mounting Holes:20*20mm,M2
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1

5.8g 500mW VTX:

Input voltage: 5V
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol

STABLE V2 F405 Version:

Flight Controller：

Model:STABLE V2 F4 30A
MCU: F405
IMU: MPU6000 gyro/accelerometer (SPI)
OSD: BetaFlight OSD w/ AT7456E chip
Baro:NO
BEC Output: 5V@3A
Integrated LC Filter
Firmware target: OmnibusF4SD

BLheli_S ESC 2-5S 4in1：

MCU:STM32F051
Input:2-6s lipo
Constant:35Amps
Burst:45Amps
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1

5.8g 500mW VTX:

Input voltage: 5V
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol

Feature introduction:
Can record 4K 30fps, 2.7k 60fps, 1080P 90fps video
Dual camera design, FPV camera 1200TVL, delay within 10ms, reach the competition level
You can use the phone WIFI/APP to adjust the 4K parameters.
F722 flight control, STABLE PRO F722 DUAL BL32 35A (advanced version)
F405 flight control, STABLE V2 F405 30A (basic version)
Black Box: 32Mb Onboard Flash
The maximum power of the picture is 500mW, and the flight distance is improved.
The propeller and paddle protection frame are not visible in the picture, which is very suitable for aerial photography.
The flight control is all designed with soft installation, so that the gyroscope has a good operating environment.
Say goodbye to jelly, the picture is stable and has a good flight view
Use the improved GEP-CX2 rack, full 3K carbon fiber board, aviation 7075 aluminum, high precision CNC, better protection 4k lens, strong and resistant to falling.
Redesigned paddle protection frame for better airflow and improved flight efficiency
Using the GEP-GR1105 5000KV motor, 4S battery is recommended (450-650mAh)
Taillight design, night aerial photography is very cool and eye-catching
Exquisite installed process to eliminate some potential installation problems
The PID is carefully debugged by the GERPC team, and the factory can be used to fly.
Weight: 127g (without battery)

Wheelbase: 115mm