Copy and share this link on social network or send it to your friends
CopyProduct Name | Happymodel Mobula 7 Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair |
Item NO. | F26464-F26465-F26466-F26467-F26468-F26469-F26470/1+F26679+F24857 |
Weight | 0.187 kg = 0.4123 lb = 6.5962 oz |
Category | DIY RC Drone Accessories |
Brand | Happymodel |
Creation Time | 2018-11-11 |
Happymodel Mobula 7 Mobula7 V2 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone BNF w/ Spare Frame and Glue For Self Repair
All props black,if you need other color props,please check here
https://www.xt-xinte.com/Happymodel-40mm-4-Blade-Propeller-PC-Props-1-0mm-Hole-CW-CCW-for-Mobula7-Mobula-7-FPV-Racing-Drone-Quadcopter-p558025.html
As many users told us this drone fly very fast,but the frame is easily broken,so we off the choice to add the repair tool kit,hope it can help you,thanks!
Please note that All the drones will come with new V2 Frame(Black frame or White frame randomly),the Mobula7 Upgraded Version
Specification:
Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
Basic Version: USB Charger
Standard Version: 6-way Charger
Receiver ( Optional): Compatible Frsky NON-EU Receiver
Compatible Frsky EU-LBT Receiver ( XM+ Receiver)
Compatible Flysky AFHDS/ AFHDS-2A Receiver
Compatible DSM2/DSMX Receiver
Crazybee F3 Pro Flight Controller |
Item Name: Crazybee F4 Pro FC MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Receiver ( Diffirent version having diffirent receiver) Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 28A Current meter scale set to 1175 Built-in 5V 1A BEC with LC filter Built-in voltage detection BLHELI_S pass-through Ready Heading LED Ready Firmware (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS (DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX (Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS |
Onboard 5A 4 In 1 ESC |
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) |
Onboard Frsky NON-EU receiver Version |
SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Onboard Frsky EU-LBT Version (External XM+ receiver) |
Operating Voltage Range: 3.7~10V |
Onboard Flysky receiver Version |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Onboard DSM2 / DSMX receiver version |
Serial bus receiver Protocol: DSM2/DSMX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
SE0802 16000KV Motor |
Model: SE0802 KV: 16000KV Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
No.of Cells: 1S Lipo
Support 1-2S Lipo |
Propeller |
40mm 3-blade Propeller ( 4 CW + 4 CCW) |
5.8G VTX AIO Camera |
5.8G 40CH 25mW VTX Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) 700TVL FOV120 Camera Camera resolution: 700TVL Field of view: 120° Video Format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smartaudio ready(Frsky EU-LBT and DSMX version not compatible) Size: 13.9"12.0mm ( L*W ) Weight: 3g |
Lipo Battery |
Capacity:250mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 55mmx12mmx7mm Weight: 6.5g Connector: PH2.0 Notes: Need 2pcs batteries for Series circuit |
1x Screwdriver
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
2019-05-20
Ch****an
On 2s i can do all the tricks (mattyflip , inverted yaw spin and so on) I normally do with my 5 inch quad.
On 1s it fleis very smooth, which is perfect for indoor.
2019-01-29
R****i
Siehe Videos:
https://www.youtube.com/watch?v=CSVqK_r8ufU
https://www.youtube.com/watch?v=DdAlHRjgz8Y
Ich habe die FrSky Standardversion bestellt.
2x 250mAh und 2x 300mAh LIPO waren dabei,
aber 450mAh LIPO wäre besser.
Nach dem Happymodel Mobula7 kam der Eachine TRASHCAN, der besser ausgestattet ist. Den hab ich mir auch bestellt.
XT-Xinte hat nun viele Ersatzteile für den Mobula7, die mir alle vom TRASHCAN bekannt sind.
****
The Mobula7 has inspired me from the beginning :-)
See videos:
https://www.youtube.com/watch?v=CSVqK_r8ufU
https://www.youtube.com/watch?v=DdAlHRjgz8Y
I have ordered the FrSky standard version.
2x 250mAh and 2x 300mAh LIPO were there,
but 450mAh LIPO would be better.
After the Happymodel Mobula7 came the Eachine TRASHCAN, which is better equipped. I've ordered that too.
XT-Xinte now has many replacement parts for the Mobula7, all known to me by TRASHCAN.