JMT T210 DIY FPV Racing Drone Kit RC Quadcopter with 210mm Frame Kit OmniF4 Pro V2 Flight Control Camera Mount for GOPRO 5 6 7
DIY RC Drone Kit,unassembled,with Camera, VTX, buzzer and flight control pre-Soldered
Functions and features:
3D printing directly on the upper plate of the rack, which can fix the camera and camera, easy to install
For GOPRO5 / 6/7 camera mount: 25/30 degrees
Support SBUS, IBUS, PPM function receiver
Support 3-4S battery
Specifications:
Brand: JMT
Wheelbase: 210mm
Flight control: betaflight F4 (V2), 30.5 * 30.5mm mounting holes
Picture Transmission: Compatible with all major FPV receivers from Fatshark, ImmersionRC, etc. Supports standard 40-channel devices: A, B, E, Fatshark and Raceband Variable transmit power from 25 mW to 800 mW
Camera: 4: 3/16: 9 PAL / NTSC switchable 1200TVL 4.5-25V
Motor: 2306 2400kv 3-4s
ESC: 30A 3-6S 5V 3A BEC Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), Multishot (5-25us) and D-shot run BLHELI_S J_H_xx firmware
Paddle: 5053 three-blade paddle 7 colors
Battery: 3S 11.1V 1500mah 40C XT60 plug lipo
Assistant software:
https://github.com/betaflight/betaflight-configurator/releases/tag/10.6.0
Package include:
1x JMT T210 210mm Frame Kit
1x 3D Print Camera Mount for Gopro 5 6 7 Action Camera (Color Red / Blue Optional,25/30 degrees Optional)
4x 2306-2400kv 3-4S Motors
1x 30A 3-6S 4in1 ESC
1x betaflight OmniF4 Pro(V2) Flight Controller
1x 5*5*3 props(7 Pairs per bag)
1x Buzzer
1x Foxeer Razer Micro 1200TVL 1/3 CMOS 1.8mm FPV Camera
1x QwinOut -5.8G FPV Antenna
1x Holybro Atlatl HV V2 5.8G 40CH 25/200/500/800mW FPV VTX
No related record found