PCIe 4.0 x1/x4 To x8 Extension Riser Cable 90/180 Degree Extender PCI-E 4.0 x1 8G/bps,x4 Gen4 for Network Card SSD Adapter

SL--90 degree connector

SF--180 degree connector

Brand: XT-XINTE

Product model: R81 (PCI-E x1)/R82 (PCI-E x4) series products

Product name: PCI-E 4.0 x8 to x1 or PCI-E 4.0 x8 to x4 transfer extension cable

Wire length: 3~100cm, (support wire length customization, if you need other lengths, please contact us to change the price, thank you!)

Bandwidth speed:

PCIe 4.0 x1, 8G/bps

PCIe 4.0 x4, gen4

Applicable matching cards: wireless network card, wired network card, capture card, USB card, solid state drive card, as long as the PCIe card is x1 or x4, and the motherboard slot is x8, it can be used.

Procurement Tips: For bulk orders, you must first buy 1 to 2 samples after testing and verifying that they are correct before purchasing in bulk.

Friendly reminder: There are many compatibility problems with this product. Incorrect assembly or improper operation will burn your equipment. Only designated by professional engineers to purchase. This product is a customized product and cannot be returned or exchanged. Please consider and confirm clearly before placing an order.

Description of wire length:

The length of the wire refers to the part of the visible wire, excluding PCB and connectors.

Product advantages:

1. Cable advantage, using high-quality connectors, high frequency support PCIe 4.0 x1 8G/bps / PCIe 4.0 x4 gen4 stable transmission

2. Cable length advantage, from 3 cm to 1 meter can be customized, this adapter cable, the wire impedance is low, the cable length within 60cm can stably support PCIe4.0 full speed.

3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.

4. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high-TG plates. The thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content and the gold-plated foot has good electrical conductivity, which can reduce oxidation and rust resistance caused by increased resistance. The crash of the sound problem.

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding point, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem.

6. The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.

PCIe 4.0 x1, 8G/bps:

PCIe 4.0 x4, gen4: