Product Name | Snapper7 Brushless Whoop Racer Drone BNF with FPV Watch Micro 75mm FPV Racing Quadcopter Crazybee F3 Flight Control Flysky/Frsky RX |
Item NO. | F18526-C/F18526-D/F18526-E |
Weight | 0.82 kg = 1.8078 lb = 28.9246 oz |
Category | RC Toy Drone |
Brand | jmt |
Creation Time | 2018-09-26 |
Snapper6 1S Brushless Whoop Racer Drone BNF with FPV Watch 65mm Micro FPV Racing RC Drone Quadcopter
This is BNF Basic/Standard Version, Compatible with Flysky Receiver, Please take it into account before ordering according to your Transmitter.
Basic Version include 1x Battery with USB Charging ; Standard Version include 3x Batteries with 6-Way Lipo Charger, Please choose the item you want.
Package includes:
Item Name |
Basic version |
Standard version |
Snapper 7 Frame |
1 |
1 |
Crazybee F3 FC (Frsky and Flysky option) |
1 |
1 |
SE0703 KV19000 Motor |
4 |
4 |
40mm 3-blades propeller(4cw+4ccw) |
1 |
1 |
AIO Camera & VTX |
1 |
1 |
3.8v 450mah 30C/60C battery |
1 |
3 |
USB Lipo/LIHV Charger |
1 |
0 |
1S06 6 way Lipo/LIHV charger |
0 |
1 |
Propeller disassemble tool |
1 |
1 |
Screwdriver |
1 |
1 |
Specifications:
Brand Name: JMT
Mode Name: Snapper7
Item Name: 1S Brushless Whoop racer drone BNF
Wheelbase: 75mm
Size: 98.5mm*98.5mm*36mm
Weight: 28g(without battery)
Features:
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
CNC aluminum alloy propeller guard
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
Adjust the settings and the PID of the flight controller via OSD
Frsky version support both EU LBT and NON-EU Frsky transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
Spare parts specifications:
Motor |
Mode: SE0703 KV19000
Configu-ration:9N12P
|
Flight controller |
Firmware: Betaflight_3.3.0_Crazybee
Board size: 28.5 * 28.5MM Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky receiver with telemetry(D8/D16 switchable) Built-in Betaflight OSD(SPI Control) Built-in Current meter (Max 14A,could be modified to 28A by replace resistor) Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection Heading LED Ready |
Onboard 4in1 ESC |
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v) |
Frsky receiver Version |
SPI BUS receiver Frsky D8/D16 switchable Compatible both of Non EU and EU LBT transmitter Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Flysky receiver Version |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
AIO Camera&VTX |
Output power: 25mw |
Lipo Battery |
Capacity:450mAh Connector: PH2.0 |
FPV Watch:
Specification:
Screen: 2" TFT LCD display.
Resolution: 480*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found