iFlight ProTek R20 Analog 3S ELRS 2.4G 94mm Wheelbase With VTX 6500KV Motor BNF Item NO.: F47573

iFlight ProTek R20 Analog 3S ELRS 2.4G 94mm Wheelbase With   VTX 6500KV Motor BNF

PRODUCT DESCRIPTION

PRE-TUNED & PRE-SETUP:

Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight

experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

ProTek R20 BNF Specs:

VTX: SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Weight: 89.2g (without battery)

Bottom plate thickness: 2.5mm

Motor: XING-E 1105 6500KV

Top plate thickness: 1.5mm

Body Size: 132mm*122mm

FC pattern: 25.5*25.5mm

FPV cam spacing: 14mm

Whoop F4 AIO 1.1(LINK)

Arm Thickness: 2.5mm

Propeller size: 2 inch

Wheelbase: 94mm

Specifications:

AIO//Whoop AIO F4 V1.1 AIO

Mounting pattern: 25.5*25.5mm/φ3mm

Firmware Target: IFLIGHT_F411_PRO

Constant current: 20A，25A (Burst)

Config：IFLIGHT_F411_PRO.config

Connector: Micro-USB

ESC Firmware: Q-H-15

Current sensor: yes

BEC output: 5V 2A

ESC Telemetry: NO

Size: 30.5*30.5mm

MCU: STM32F411

BLHeli: BLHeli-S

Barometer: NO

Blackbox: 8MB

Gyro: BMI270

INA pad: nR2

Weight: 7.4g

Input: 2-4S

VTX//SucceX Mini Force 5.8GHz 600mW VTX Adjustable

-Power: PIT/25/200/400mW/600mW

-Antenna interface: MMCX

-VTX protocol : IRC Tramp

-Output 40 channels.

-Size: 29*29mm

-Mounting pattern: 20*20Φ3/25*25 mmΦ2

-Weight: 4g

ProTek R20 Analog Quad BNF Included Components and Parts

pre-built and tested Quadcopter

1 x iFlight Lipo Strap 10*150mm (Color May Vary)

2 x HQ 2*2*3 (Set of 4 - Color May Vary)

1 x ProTek R20 AnalogBNF